Corn residue breakdown as affected by tillage and nitrogen application


Figure 1 ... Rate of CO2-C released as an indicator of residue breakdown/decomposition from control (bare soil) and Bt and non-Bt corn residue mixed into the soil or un-mixed with soil (left on soil surface). Asterisk represents CO2-C released rates from treatments that were significantly different from control for the corresponding days at the 0.05 probability level using the least significant difference.

by Mahdi Al-Kaisi, professor of soil management/environment, Integrated Crop Management News, and Iowa State University Extension and Outreach

Crop residue serves an important role in physically protecting soil from erosion during rain events or high winds, as well as enhancing the soil biological activity by providing sources of organic carbon and nitrogen for its energy needs. In order to understand how residue decomposes, we need to understand how the degradation processes are influenced by environmental and soil conditions; namely, air and soil temperatures, soil moisture availability, soil pH, oxygen, and type of microbial community. The composition of crop residue includes lignin, cellulose, hemicellulose, and macro and micronutrients. Certain biological and enzymatic processes, controlled by a wide range of microorganisms and influenced by other factors, must occur in order to release most of these organic forms.

In agriculture, annual cropping systems and other ecosystems management can influence these factors that are critical to the process of residue breakdown. There is a common belief among many farmers and agronomists that tillage can accelerate residue breakdown by the cutting of crop residue into small pieces or burying residue in the soil profile. Also, there is the belief that the application of nitrogen fertilizer on crop residue (i.e., corn residue) after harvest can speed up the process of residue breakdown. Both assertions are not correct.

Tillage Effects on Residue Breakdown
A study conducted to examine the effect of three different tillage systems that include deep tillage (DT), strip-tillage (ST), and no-till (NT) on residue breakdown of both Bt and non-Bt corn residues. The results of this three-year field and laboratory incubation studies show no significant differences in the breakdown or percent of residue that remained among the three tillage systems with either Bt and non-Bt corn hybrid residues. Also, after 12 months, there was no difference between tillage systems or Bt and non-Bt hybrid residue breakdown in the field, where 34-49% of the corn residue still remained on the soil surface. The results of the residue decomposition study are presented in Figure 1, where the residue decomposition rate is represented by CO2-C release. The results show no significant difference in the breakdown or decomposition due to tillage or type of residue (Bt or non-Bt).

Nitrogen Fertilizer Application Effects on Residue Breakdown
The results of the study on corn residue decomposition with different N rates in the no-tillage system under field conditions are presented in Figure 2a. Corn residue decomposition was evaluated by applying 32% UAN at three N rates (0, 30 and 60 lb N/acre) to corn residue immediately after harvest, where specific amounts of corn residue were weighed and placed in nylon mesh bags and left in the field immediately after harvest for decomposition evaluation. The rate of residue decomposition was evaluated every three months for the entire year (12 months).

The results showed that corn residue decomposition increased with time with lesser amounts of residue remaining after each evaluation period, but no differences existed in the rate of residue decomposition as a result of N application of different N rates. These results show that applying N fertilizer to facilitate residue decomposition is not effective. The timing of N application for corn residue decomposition immediately after harvest, as practiced, is not an effective strategy, as the soil and air temperatures decrease over time after fall harvest. Soil moisture and temperature are essential factors for microbial activity for the residue decomposition (moisture at field capacity and warm temperature above 50o F). Therefore, fall N application does not achieve the intended result of facilitating residue decomposition.

The same results were observed with laboratory evaluation of corn residue decomposition that was conducted with the same residue treated with different N rates in the field study. Corn residue samples from the field were incubated in the laboratory under constant temperatures of 32o F and 90o F for approximately 30 days each (Fig. 2b and 2c). The rate of corn residue decomposition under laboratory conditions followed a similar trend as that in the field.

Again, no differences in residue decomposition/breakdown with different N rates were found. The laboratory study results confirmed the field results and demonstrated the role of temperature in controlling corn residue decomposition rather than N rate, where a slower rate of residue decomposition was observed at the low temperature (32o F) and increased at the higher temperature (90o F) (Fig. 2b and 2c) without any effect of N application on residue breakdown.

Summary
The use of tillage or N application to increase residue decomposition can be counterproductive from economic and environmental perspectives. From an economic perspective, both options of management add additional costs of materials, time, labor, fuel, and equipment costs. Environmentally, both tillage and this fall N application are not very sustainable practices. Tillage can contribute to soil health and water quality deterioration by increasing soil erosion potential, sediment loss, and water quality degradation, and fall N applications result in water quality risks. Since residue decomposition is controlled by biological processes that are influenced by environmental and soil conditions, our research and many other studies do not support these practices regardless of the justification or claims that propose tillage equipment can manage residue. Disturbing the soil does not constitute an improvement in soil health nor increase in residue decomposition.